PRODUCT DESCRIPTION

Our all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here…

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

Durable plastic protectors with copper standoffs, portable compact design, easy accessible UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.Link

Need a naked GoPro case or mount? Checkout our new iFlight naked GoPro Hero8 TPU case to use with your ProTek25.LINK

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features:

– No Props or frame in view!

–Caddx.us Turbo Eos V2 FPVCam2.1mm 16:9 NTSC

– High performanceSucceX-D 20A Whoop F4 AIO Boardto save weight and space

– T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

– Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

– Low Resonance frame construction (Less Jello, more Cinematic footage)

– Butter smooth XING1404 5500KVmotors

– Pre-tuned with smooth freestyle settings

PRE-TUNED & PRE-SETUP:

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on“Firmware/Factory Dumps”

– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on“How to disable Angle-Mode, activate Acro-Mode”

ProTek25 BNF Specs:

– SucceX-D 20A Whoop AIO(LINK)

– Motor: XING 14045500KV(LINK)

– Wheelbase: 114mm

– Body Size: 91*68.7mm

– Bottom plate thickness: 3mm

– Top plate thickness: 2mm

– Top and bottom plate spacing:24mm(aluminum standoff height)

– Propeller size: 2.5 inch

– FC pattern:25.5*25.5mm / 20*20mmmm

– FPV cam spacing: 20mm

– Weight: 194.3g (without battery)

ProTek25Quad BNF Included Components and Parts

pre-built and tested Quadcopter

– 1x ProTek25 Frame

– 1xCaddx.us Turbo Eos V2 FPVCam2.1mm 16:9 NTSC

–1xAlbatross LHCPRP-SMA5.8g antenna

– 2x Nazgul 2525 propeller (Set of 4 – Color May Vary)

– 2x iFlight Lipo Strap 15*200mm (Color May Vary)

– 1x NakedGoPro TPU bottom stand black (Naked GoPro Protector not included)

FC // SucceX-D 20A F4 Whoop AIO

*Size30.5*30.5mm

*Mounting pattern25.5*25.5mm/3mm

*ConnectorMicro-USB

*MCUSTM32F411

*GyroMPU6000

*Blackbox8MB

*BEC output5V 2A/10V 2A

*INA padUART2 (nR2)

*Barometerno

*Constant current20A25ABurst

*Input2-4S

*Current sensoryes

*BLHeliBLHeli-S

*ESC Telemetryno

*TargetIFLIGHT_F411_PRO

*ESC FirmwareG-H-30 BLS

VTX// SucceX Micro Force 5.8GHz 300mW VTX Adjustable(LINK)

-Power: PIT/25/100/200mW/300mW

-Antenna interface: IPEX (UFL)

-VTX protocol : IRC Tramp

-Size: 13.5×14.5mm

-Weight: 1.4g

Additional Suggested Parts – Not included

• iFlight FPV Goggles with DVR Function(LINK)

• Battery 4S 850mAh(LINK)