The S13V25Fx family of efficient switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) use a buck-boost topology to convert both higher and lower input voltages to a regulated output voltage. They take input voltages from 2.8 V to 22 V and increase or decrease them as necessary, offering a typical efficiency of over 85% and typical continuous output currents between 1 A and 3 A. The flexibility in input voltage offered by this family of regulators is especially well-suited for battery-powered applications in which the battery voltage begins above the regulated voltage and drops below as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered.

The S13V25Fx regulators have under-voltage lockout, output over-voltage protection, over-current protection, and reverse-voltage protection up to 20 V. A thermal shutdown feature also helps prevent damage from overheating and a soft-start feature limits the inrush current and gradually ramps the output voltage on startup.

This family consists of six 2.5 A regulators with output voltages ranging from 3.3 V to 15 V. These all use the same PCB with different components populated to achieve the different output voltages:

S13V25F3: 3.3V output with 2.5 A continuous output current
S13V25F6: 6V output with 2.5 A continuous output current
S13V25F7: 7.5V output with 2.5 A continuous output current
S13V25F9: 9V output with 2.5 A continuous output current
S13V25F12: 12V output with 2.5 A continuous output current
S13V25F15: 15V output with 2.5 A continuous output current

Features:

Input voltage: 2.8 V to 22 V
Output voltage: 7.5V with 4% accuracy
Typical maximum continuous output current:1 A to 3.5 A, depending on input voltage
Typical efficiency of 85% to 95%, depending on input voltage and load
10 mA to 25 mA typical no-load quiescent current
Input under-voltage lockout and output over-voltage protection
Soft-start feature limits inrush current and gradually ramps output voltage
Integrated reverse-voltage protection up to 20 V, over-current protection, and over-temperature shutoff
5.1 A output current limit
Fixed switching frequency of ~500 kHz
Compact size: 22.9 mm 22.9 mm 9.7 mm
Two 0.086″ mounting holes for #2 or M2 screws