Espressif ESP32 Pico Mini 02 8M Flash 2M PSRAM Module

ESP32-PICO-MINI-02 is a general-purpose Wi-Fi + Bluetooth + Bluetooth LE MCU modules. It is an 8 MB SPI flash, 2 MB SPI Pseudo static RAM (PSRAM) and 40 MHz crystal oscillator. The rich set of peripheralsand a small size make the module an ideal choice for a wide variety of IoT applications, ranging from home automation, smart building, consumer electronics to industrial control, and they are suitable for intelligentspeakers, speech recognition toys, intelligent gateway and Ethernet, etc.ESP32-PICO-MINI-02 comes with a PCB antenna.

At the core of ESP32-PICO-MINI-02 is the ESP32-PICO-V3-02 sip*. The chipembedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled,and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The chip also has a low-powercoprocessor that can be used instead of the CPU to save power while performing tasks that do not require muchcomputing power, such as monitoring of peripherals. This ESP32 chip integrates a rich set of peripherals,ranging from SD card interface, capacitive touch sensors, ADC, DAC, Two-Wire Automotive Interface, to
Ethernet, high-speed SPI, UART, I2S, I2C, etc.

Features

CPU and OnChip Memory

• ESP32-PICO-V3-02 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz
• 448 KB ROM for booting and core functions
• 520 KB SRAM for data and instructions
• 16 KB SRAM in RTC
• 8 MB SPI flash
• 2 MB PSRAM

WiFi

• 802.11b/g/n
• Bit rate: 802.11n up to 150 Mbps
• A-MPDU and A-MSDU aggregation
• 0.4 s guard interval support
• Center frequency range of operating channel:2412 ~ 2484 MHz

Bluetooth

• Bluetooth V4.2 BR/EDR and Bluetooth LE

specification

• Class-1, class-2 and class-3 transmitter
• AFH
• CVSD and SBC

Peripherals

• SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO,
  capacitive touch sensor, ADC, DAC, TWAI(compatible with ISO 11898-1, i.e. CAN
  Specification 2.0), Ethernet MAC

Integrated Components on Module

• 40 MHz crystal oscillator

Antenna Options

• ESP32-PICO-MINI-02: On-board PCB antenna
• ESP32-PICO-MINI-02U: external antenna via a connector

Operating Conditions

• Operating voltage/Power supply: 3.0 ~ 3.6 V
• Operating ambient temperature: 40 ~ 85 C

Certification

• Green certification: REACH/RoHS Test
• Reliability: HTOL/HTSL/uHAST/TCT/ESD