The Meteor65 1S Brushless Whoop (2022) is a lightweight and versatile drone that is perfect for wintertime flying. Its 22.83g weight (without battery) and compact 65mm frame make it easy to maneuver and control. The F4 1S 5A FC (Serial ELRS 2.4G)/F4 1S 5A FC (SPI Frsky) ensures smooth and reliable flight performance, while the 0802SE 19500KV Motor provides powerful thrust. The 31mm 3-blade props (1.0mm Shaft) and 30 (default)/20 (optional) tilt angle allow for agile and responsive movement.

The C03 FPV Camera and M03 25-350mW VTX provide high-quality video and audio transmission, allowing you to see and hear everything in real-time. The included BT2.0 300mah 1S Battery provides up to 4 minutes of flight time, giving you plenty of time to capture stunning aerial footage. The 2022 version of the Canopy for Micro Camera adds a sleek and stylish touch to the overall design.

In short, the Meteor65 1S Brushless Whoop (2022) is a top-of-the-line drone that offers the perfect balance of performance, weight, durability, and build quality. Whether you’re a professional drone pilot or a beginner looking to improve your skills, this drone is sure to impress.

Features

Meteor65 is the first generation whoop drone powered by a brand-new BT2.0 1S battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector.
By using the latest 0802SE 19500KV motors and 31mm 3-blade props, this kit provides you with a completely different experience of a powerful indoor flight.
Built-in 1.52g ultralight weight and upgraded C03 FPV camera . This new camera has optimal performance for indoor whoop drones.
Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Reserve two UART ports on F4 1S 5A FC (SPI Frsky) board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
F4 1S 5A FC (Serial ELRS 2.4G) is flexible in upgrading and has great potential. It supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware.
The various colors of the spare parts including the 65mm frame , micro canopy , and propellers offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.

Specification

Item: Meteor65 1S Brushless Whoop (2022)
Weight: 22.83g (without battery)
FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G)/F4 1S 5A FC (SPI Frsky)
Frame: Meteor65 65mm 1S Brushless Frame
Motors: 0802SE 19500KV Motor
Props: 31mm 3-blade props (1.0mm Shaft)
Tilt: 30 (default)/20 (optional)
Camera: C03 FPV Camera
VTX: M03 25-350mW VTX
Canopy: Canopy for Micro Camera 2022 version
Battery: BT2.0 300mah 1S Battery
Flight time: 4 mins

The 2022 version of the Meteor65 drone introduces several new features and improvements. One notable change is the new micro canopy, which helps to reduce the impact of heat on the electronics and improve overall performance. This version also supports serial ExpressLRS 2.4G instead of SPI ELRS 2.4G, providing a more reliable connection. Additionally, the C03 FPV Camera ensures clear and high-quality images, allowing you to see and capture stunning aerial footage with ease. Overall, these updates make the Meteor65 an even better choice for winter time flying.

Meteor65 (2022)	Meteor65 (2021)
FC&ESC	F4 1S 5A FC (2022)	F4 1S 5A FC
RX	Serial ELRS 2.4G, SPI Frsky/PNP, TBS	SPI ELRS 2.4G, SPI Frsky, TBS
Camera	C03 FPV Camera	C02 FPV Camera
Motors	New 0208SE 19500KV (Ice Blue)	0208SE 19500KV (Black version)
Canopy	New Micro Canopy (2022)	Micro Canopy
Tilt	20 or 30	30
Weight	22.83g (without battery)	22.84g (without battery)
Flight Time	4 mins	3.5-4 mins

Flight Controller & ESC

The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor65. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP and can be switched to Futaba SFHSS protocol through Betaflight configurator. The ESC on the new board powered by BB51 hardware in place of BB21 comes with Bluejay 96k ESC firmware, allowing 0802SE 19500KV motors to give full play to the efficiency of power. We update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.

	Meteor65 (ELRS)	Meteor65 (Frsky, PNP, TBS)
FC Inside	F4 1S 5A FC (Serial ELRS 2.4G)	F4 1S 5A FC (SPI Frsky)
Gyro	BMI270	BMI270
FC Firmware	BETAFPVF411	BETAFPVF411RX
UART Port	One UART Port	Two UART Ports
External RX	Not Supported	Supported

Note: For F4 1S 5A FC (serial ELRS 2.4G), ONLY Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For F4 1S 5A FC (SPI Frsky), we recommend using BETAFPVF411RX 4.2.11 firmware and CLI dump file offered by BETAFPV. If you update the 4.3.0 and up firmware for serial ELRS 2.4G from the Betaflight official site, please flash the CLI dump file for Meteor65.

C03 Camera

The C03 FPV Micro Camera is a lightweight and compact camera designed for indoor micro FPV quadcopters. It weighs just 1.52g and features a 1200TVL definition and 1/3″ CMOS sensor, providing clear and sharp images. The 2.1mm lens offers a 160 field of view, giving you a wide range of vision. The camera also has excellent latency, ensuring that the images you see through your goggles are high-quality and real-time. Overall, the C03 FPV Micro Camera is an excellent choice for capturing clear and detailed footage with your quadcopter.

The 0802SE 19500KV Motor is a lightweight and powerful brushless motor designed for 1S drones. Compared to other 0802 series motors, it is significantly lighter at just 1.88g per motor. Despite its small size, it provides excellent performance in terms of power and thrust. The perfect dynamic balance ensures that the drone is more agile and can fly for longer periods of time. Overall, the 0802SE 19500KV Motor is an excellent choice for those looking to improve the performance and endurance of their drone.

Meteor65 Frame

The Meteor65 frame is designed to be lightweight and low profile, making it perfect for indoor and winter time flying. It weighs just 3.25g and features a unique design that places the battery slot closer to the center of gravity for improved flight performance. The frame also has motor screws that you can land on instead of the battery, providing added protection and durability. In addition to the standard black color, there are several other options available, including Beta-blue, mint-green, sakura-pink, mango-orange, and more. Overall, the Meteor65 frame offers an excellent balance of weight, performance, and style.