4/0-3C Shielded VFD Cable W/ 3 #2 Grounds

“4/0-3 Shielded VFD Cable W/ 3 #2 Grounds is a heavy-duty, 600V TC-ER / 1000V Flexible Motor Supply rated cable engineered for high-amperage Variable Frequency Drive systems. Constructed with three 4/0 AWG stranded bare copper conductors, XLPE insulation, a 0.005″ helical bare copper tape shield with 50% overlap, and three #2 AWG bare copper grounds, this cable provides reliable motor power and heavy-duty noise suppression. Its rugged, direct-burial rated PVC outer jacket resists sunlight, moisture, oil, and abrasion across temperatures ranging from -40C to 90C.”

Key Features & Benefits: 4/0-3C VFD Cable

Standard power cable breaks down rapidly under PWM voltage spikes and floods adjacent control systems with severe noise. This specialized 3-conductor VFD cable solves these jobsite failures:

• 0.005″ Helical Bare Copper Tape Shield: Built with a heavy-duty 0.005″ copper tape shield wrapped with a 50% overlap to trap high-frequency noise and protect nearby sensors or PLCs.

• 3 Symmetrical #2 AWG Grounds: Features three stranded bare copper grounds evenly distributed to balance magnetic fields and provide a low-impedance path for stray currents.

• Exposed Run (TC-ER) Rated: Complies with UL 1277 for continuous installation out of cable trays to the motor without rigid metal conduit.

• Heavy-Duty Industrial Jacket: Sunlight, oil, moisture, and abrasion resistant black PVC jacket (0.110″ thickness) approved for direct burial in wet or dry environments (-40C to 90C).

• Simplified Landing & Termination: The 3-conductor layout with symmetrical grounds simplifies wire routing into cramped VFD enclosures, reducing installation time and overall labor costs.

Technical Specifications: 4/0-3 Shielded VFD Cable W/ 3 #2 Grounds

ENGINEERING OVERVIEW: 4/0 AWG 3C VFD Cable

• Application: Designed for Variable Frequency Drives in applications where an insulated ground is not required.

• Voltage Rating: 600 Volts (UL Type TC-ER) / 1000 Volts (UL Type Motor Supply / WTTC per UL 2277).

• UL Listings: UL 1277 (Type TC-ER), Type XHHW-2, UL 2277 (WTTC).

• Conductor Material: Stranded soft drawn bare copper (4/0 AWG, 133 stranding).

• Ground Wire(s): Three stranded soft drawn bare copper grounds (3#2 AWG).

• Insulation: Thermoset Cross-Linked Polyethylene (XLPE / XLP) (0.055″ / 1.40 mm thickness).

• Shielding: 0.005″ helical bare copper tape shield with a 50% overlap.

• Color Code: Black insulation with ICEA Method 4 printed numbers (“1-One”, “2-Two”, “3-Three”).

• Jacket Material: Black Polyvinyl chloride (PVC) (0.110″ / 2.79 mm thickness).

• Temperature Rating: -40C to 90C (90C Wet/Dry).

• Cable Outer Diameter: 1.73 inches (43.99 mm).

• Compliance Standards: CSA FT-4 vertical tray flame test; CSA AWM I/II A/B singles; C(UL) CIC-TC per CSA C22.2 No. 239 & 230; Meets UL 1202/1583 (70,000 BTU) & ICEA T-29-520 (210,000 BTU) flame tests; Class I Division II Hazardous Location suitable; RoHS II & REACH compliant.

Common 4/0-3 VFD Cable Applications

• Heavy Industrial Conveyors & Primary Drives: Delivering clean power to 4/0 AWG 3-phase motor loads while blocking EMI from reaching nearby control panels.

• Large-Scale HVAC & Chiller Systems: Powering high-horsepower variable speed supply fans, central plant chillers, and industrial pumping systems.

• Process Machinery Interconnects: Interconnecting heavy processing equipment in station trays with streamlined termination.

• Outdoor & Wash-Down Drives: Powering variable-speed drives in wet, direct burial, or outdoor environments where oil and UV resistance are required.

Technical Note:All values are nominal and subject to industry tolerances and manufacturer corrections. Specifications are subject to change without notice. It is the buyers responsibility to verify that all materials meet the specific requirements of the project and comply with local electrical codes.