ALM Busy Circuits 84HP 9U Eurorack Case

The ALM powered Eurorack case was originally designed for theSystem Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves. A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light. The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport. Assembled aluminium lightweight cases with integrated switched power busses. At least 1Amp per -/+ 12V rail per row with quoted 100mV ripple noise at max load. No 5V rail. Overload & Short Circuit protection. Support modules up to 42mm depth (approx 2 stacked pcbs). All ALM modules fit. M3 threaded fixed mounting strips (no sliding nuts!). Module mounting screws and Allen key included. Includes 12v external DC/DC power \’brick\’ with center positive 2.1mm barrel and at least 2 or 4 Amp rating (depending on model).