Simpson PFDL28B 2×8 LVL Galvanized Post Frame Double Saddle Hanger

• Model No. PFDL28B
• Joist Size. 2×8
• Gauge. 20
• Width (in.) 1 9/16
• Height (in.) 7
• B (in.) 1 1/4
• TF (in.) 1 13/16
• Coating/Material. Zinc Galvanized, G90

The PFDB is a top-flange saddle hanger designed for post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFDB features a folded seat that raises the 2x joist slightly above the seat radius to enable a tighter connection to the back of the hanger. The solid, one-piece top flange allows for accurate and fast installation.

Key Features

• Installation prongs make setting the hanger quick and easy
• The double-shear nailing design distributes the load through two points on each joist, providing greater strength with fewer nails
• PFDSB saddle models are for back-to-back 2x joists, and PFDLB saddles are for LVL joists

Installation

• Fasteners required. 0.148 in. x 1-1/2 in. nails. or 0.148 in. x 3 in. nails
• 0.148″ x 3″ purlin nails must be driven at an angle through the purlin into the header. Combine with top nails to achieve table loads.
• 0.148″ x 1 1/2″ purlin nails must be driven at an angle into the purlin but do not penetrate into the header. Combine with back face fasteners and top nails to achieve table loads.

Note: Product dimensions may differ from picture. Please see item description for specifications.