Simpson 4 x 4 Black Composite-Plastic Standoff Post Base CPS4-R

The Simpson Strong-Tie CPS is a composite-plastic standoff designed for increased concrete surface area. The molded composite plastic will never rust and has been designed for maximum durability.

Model No. CPS4-R
Nominal Post Size 4×4
W (in.) 3 1/4
H (in.) 1
L (in.) 3 1/4

Fasteners Required: – (4) 0.148 x 3″ Nails – (1) 5/8″ Concrete Anchor

Installation:
Post:

• Drill a 3/4″ diameter hole, 10″ into the center of the post.
• Clean out dust. Fill hole halfway with Simpson Strong-Tie SET epoxy anchoring adhesive.
• Insert all-thread rod and allow epoxy to set and cure.
• Secure standoff to post using four 10d nails except PBV which uses four Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws.

Concrete:

• Drill a 3/4″ diameter hole per anchor design.
• Clean out dust. Fill hole halfway with Simpson Strong-Tie SET epoxy anchoring adhesive.
• Insert post subassembly into hole and allow epoxy to set and cure.
• Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.