Simpson TB27 27″ Galvanized Tension Bridging 20-Ga.

• Model No.TB27
• Gauge. 20
• Length (in.) 27
• Coating/Material. Zinc Galvanized, G90

The TB provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this tension-type bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The TB model line is designed with flexibility to fit multiple joist sizes for each model depending on joist height and O.C. joist spacing.

Key Features

• Galvanized for corrosion resistance
• Keeps floor system continuity and prevents joist rotation

• Installation flexibility, with seven nail holes on each end

Installation

• Support floor joists with a depth-to-thickness ratio of six or more with bridging at intervals not exceeding 8′. If span is greater than 8′, install on 2×8 or larger joists. If span is greater than 16′, use more than one pair.
• Tension bridging works only in tension, so must be used in cross pairs.
• Install bridging tightly; loose installation may allow floor movement.
• Requires two 0.148″ x 1 1/2″ fasteners per end.

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.