#2 AWG 3/C with Ground Generator Cable + 18/9 Control Wire, UL Type TC-ER-JP, 600V

APPLICATION:
600V COPPER TC-ER-JP Generator Cable is a multi-conductor, all-in-one cable specifically designed and listed for use in residential and light commercial power systems under new National Electrical Code (NEC) allowances.
The most common and intended use is to connect a standby generator to its 7kW-26kW automatic transfer switch (ATS). JP (Joist Pull) rated per NEC 336.10(9). UL listed as Type TC-ER-JP for applications not to exceed 600V.

ELEMENT 1 CONDUCTORS:
Annealed Bare Copper Class C.
2 AWG, 3 Conductors
Colors: Black, Red and White

ELEMENT 2 CONDUCTORS:
Annealed Bare Copper Class K.
18 AWG, 9 Conductors
Colors: Black, Red, Yellow, Yellow/Black, Blue, White, White/Blue, Purple, and Purple/Black.

ELEMENT 3 GROUND:
Annealed Bare Copper Class C.
6 AWG, 1 Conductor
Color: Green

ASSEMBLY:
All 3 Elements or Conductors are cabled together with NonHygroscopic Polypropylene fillers as required for a circular cross-section with a clear mylar binder tape and jacketed.

INSULATION:
Elements 1, 2 & 3: Polyvinylchloride (PVC) & Nylon.

JACKET:
Black sunlight & flame resistant and direct burial approved PVC with ripcord rated 90C wet or dry per UL 1277.

AMP RATING:
115 Amps, 26kW

VOLTAGE:
600 Volts

All values are nominal and subject to correction. *Ampacity according to NEC 310.15(B)(16) @30C THWN 75C insulated wires. **Installations shall follow NEC, applicable correcting factors shall be considered when conditions vary.