4/2 TECK90 Cable with Ground – 1000V Aluminum Interlocked Armor (AIA)

Engineered for harsh industrial and heavy-utility applications, 4 AWG 2-Conductor TECK90 Armored Cable delivers complete 1000V single-phase power and circuit protection without installing rigid conduit runs.

Featuring two stranded copper conductors, an 8 AWG bare copper ground wire, dual PVC jackets, and flexible Aluminum Interlocked Armor (AIA), it transitions seamlessly from indoor cable trays and concrete barriers directly into outdoor aerial runs or subterranean direct-burial trenches.

Key Features & Benefits: 4/2 TECK90 1000V Armored Cable

• Dual-Jacket Direct Burial Protection: The inner bedding PVC cushions the core, while the heavy-duty -40C outer PVC jacket seals the aluminum armor against water, corrosive soil chemicals, and mechanical abrasion.

• 1000V Heavy-Duty Rating: Built with RW90 XLPE thermoset insulation rated up to 1000V and continuous operating temperatures from -40C to +90C in wet or dry locations.

• Single-Phase 95A Power Architecture: Features two 4 AWG stranded bare copper circuit conductors and an 8 AWG bare copper ground wire for high thermal efficiency and continuous load capacity.

• Flexible Interlocked Armor (AIA): The aluminum interlocked armor shields internal conductors from crushing loads and physical impacts while keeping the assembly flexible during pulls.

• Hazardous Location & Acid Gas Certified: Rated CSA HL, FT1/FT4 flame resistant, IEEE 1202, and AG14 compliant for harsh chemical and petrochemical plants.

Technical Specifications: 4 AWG 2C TECK90 Armored Cable

• Conductor Size: 4 AWG

• Number of Power Conductors: 2

• Conductor Material: Stranded Soft-Drawn Bare Copper Class B (ASTM B8)

• Ground Wire Size: 8 AWG Uninsulated Bare Stranded Soft Drawn Copper

• Insulation Type: Cross-Linked Polyethylene (XLPE) / Type RW90

• Insulation Thickness: 0.060 inches

• Inner Jacket: Lead-free, Flame-Retardant, Moisture- & Sunlight-Resistant Black PVC

• Armor Type: AIA (Aluminum Interlocked Armor)

• Protective Outer Jacket: -40C Black PVC (Water, Chemical, Sunlight & Abrasion Resistant)

• Voltage Rating: 1000 Volts (1kV)

• Temperature Rating: -40C Minimum / +90C Continuous Operation

• Ampacity Rating: 95 Amps (per CE Code Part 1, Table 2)

• Armor Diameter: 1.07 inches

• Outer Jacket Diameter: 1.16 inches

• Approximate Net Weight: 744 lbs per 1,000 ft

• Compliance Standards: CSA C22.2 No. 131, CSA C22.2 No. 174 (Hazardous Locations), CSA FT1, CSA FT4, IEEE 383, UL 1581, IEEE 1202, ICEA T-30-520, RoHS Compliant

Technical Installation Note: Approved wet-location/explosion-proof TECK glands (such as Star Teck or TMC series) must be utilized to ensure proper ground bonding continuity and maintain watertight seals at enclosures.

Common 4/2 TECK90 Cable Applications

• Subpanel Feeds & Heavy Equipment: Delivering high-ampacity feeder power to sub-panels in detached workshops, commercial facilities, food processing plants, and outbuildings.

• EV Charging & Utility Infrastructure: Dedicated 2-wire circuit feeds for high-output Level 2 / Level 3 commercial EV chargers, site lighting networks, and outdoor distribution loops.

• Direct-Burial Trenching: Laid directly into underground trenches without conduit for agricultural equipment, well pumps, and remote utility sheds.

• Industrial Motors & HVAC Equipment: Feeding heavy 2-conductor power circuits to commercial compressors, chillers, paper mills, mines, and industrial manufacturing plants.

Ordering & Fulfillment

• Cut to Length: Sold by the foot to match your exact trench layout and eliminate scrap material.

• Fast Processing: Ships directly from regional distribution hubs to guarantee minimal transit time.

• Submittal Assistance: Need cut sheets or technical data sheets for engineering approval? Contact our sales desk at 833-268-8644 or [email protected].

DISCLAIMER: The technical information provided is for general reference only. Multi-conductor industrial armored systems must strictly comply with the Canadian Electrical Code (CEC), the National Electrical Code (NEC), and all applicable provincial or municipal enforcement safety mandates. Always verify official product submittal sheets and exact component metrics with your cable manufacturer before establishing trench depths, panel punching maps, or physical cable tray layouts.