5″ Round IPS HDMI Touch Display for Raspberry Pi (1080×1080)

This 5″ round IPS touchscreen display is a great way to add a front-end interface toyour Raspberry Pi project, and as it uses a standard full-size HDMI connection, you can use it with other devices too!

The IPS1080×1080 display has wide 160 viewing angles along with10-point capacitive touchthat allows you to easily zoom, rotate, swipe, drag, double tap or use other gestures with up to ten fingers on the screen at the same time (OS-dependent).

On the rear, you’ll find a full-size HDMI port, a 3.5mm audio jack + 4-pin speaker header,power and touch ports (USB-C) and a small backlight ON/OFF button.

The display comes with compact PCB adapters to allow you to hook up a Raspberry Pi 4 to both the HDMI port and USB (for touch data) without the need for any messy cables (apart from your power supply of course).

Raspberry Pi not included.

Features

• 5″ IPS rounddisplay for Raspberry Pi
• 1080 x 1080 hardware resolution
• 10-point capacitive touch
• Toughened glass panel, hardness up to 6H
• Optical bonding technology
• USB-C touch/power
• Backlight control button
• 3.5mm audio port + 4-pin speaker header
• Supports Raspberry Pi OS / Ubuntu / Kali and Retropie (when used with Raspberry Pi)
• Supports Windows 11 / 10 / 8.1 / 8 / 7 (when used as a computer monitor)
• Supports HDMI audio output with 3.5mm jack and 4-pin speaker header

Specifications

Resources

• Product Wiki

Pinout

Package Contents

1. 1x 5″ 1080×1080 LCD
2. 1x HDMI flat cable ~1m
3. 1x USB-A to USB-C cable ~1m
4. 1x USB to Type-C adapter (B)
5. 1x USB to Type-C adapter (C)
6. 1x HDMI to Micro HDMI adapter
7. 1x HDMI adapter
8. 1x Screws pack

Raspberry Pi not included