AI-Thinker Ra-08-Kit Development Board

Ra-08-Kit is a LoRaWAN development board designed and developed by Shenzhen Ai-Thinker Technology Co., Ltd. The development board is equipped with a LoRa module, and leads to serial ports and peripheral pins, which can be connected to the factory firmware through the The serial port assistant can easily send and receive LoRaWAN control by sending commands. The chip ASR6601 on the development board is a general-purpose LPWAN wireless communication SoC that integrates an RF transceiver, a modem and a 32-bit RISCMCU. The MCU adopts ARM core, and the operating frequency can reach 48MHz. The Ra-08 module supports LoRa modulation and traditional (G)FSK modulation under the LPWAN use case; at the same time, the transmitter also supports BPSK modulation and (G)MSK modulation, andthe receiver supports (G)MSK modulation. The Ra-08 module on the development board provides ultra-long range and ultra-lowpower communication for LPWAN applications, which can be widely used in smart meters, supply chain and logistics, home building a tomation, security systems, remote irrigation systems and other scenarios.

Features:

• Adopt DIP-30 package
• Interface type: standard micro USB + 2.54mm pitch pin header
• Support frequency: 410MHz-525MHz
• Working voltage is 5V, theoretical maximum transmit power: +22dBm
• High sensitivity:-138dBm @125Kz SF12
• Support spread spectrum factor SF5/SF6/SF7/SF8/SF9/SF10/SF11/SF12
• Embedded memory,128KB FLASH,16KB SRAM
• Support LoRa/(G)FSK/BPSK/(G)MSK modulation
• Support multiple sleep modes: depth sleep current is low to 0.9uA
• Support external antenna, the antenna uses SMA interface

Specifications:

• Development board model: Ra-08-Kit
• Suitable module: Ra-08
• Package: DIP-30
• Size: 25.40*48.26(0.2)mm
• Antenna: External SMA
• Frequency: 410-525MHz
• Operating Temperature: -40C ~ 85C
• Storage Temperature: -40C ~ 125C, < 90%RH
• Power Supply: Voltage 5V, Current >500mA
• Interface: UART/GPIO/ADC/DAC/I2C/I2S/SPI/PWMIO IO2,IO4,IO5,IO8,IO9,IO11,IO14,IO15
• UART Rate: Low-speed serial port, default 9600 bps
• Transfer Protocol: LoRaWAN,LinkWAN
• SPI Flash: 128KB