BeagleBone Board – rev A6

The BeagleBone is the low-cost, high-expansion hardware-hacker focused BeagleBoard. It is a bare-bones BeagleBoard that acts as a USB or Ethernet connected expansion companion for your current BeagleBoard and BeagleBoard-xM or works stand-alone. The BeagleBone is small even by BeagleBoard standards and with the high-performance ARM capabilities you expect from a BeagleBoard, the BeagleBone brings full-featured Linux to places it has never gone before.

Features

• Board size: 3.4″ x 2.1″
• Shipped with 2GB microSD card with the Angstrom Distribution with node.js and Cloud9 IDE
• Single cable development environment with built-in FTDI-based serial/JTAG and on-board hub to give the same cable simultaneous access to a USB device port on the target processor
• Industry standard 3.3V I/Os on the expansion headers with easy-to-use 0.1″ spacing
• On-chip Ethernet, not off of USB
• Easier to clone thanks to larger pitch on BGA devices (0.8mm vs. 0.4mm), no package-on-package memories, standard DDR2 vs. LPDDR, integrated USB PHYs and more.

Kit contains

• BeagleBone Board
• USB cable
• 4GB Micro SD card with software and documentation

Documents

• Product page
• Schematic

Recommended 5v 1A PSU.