In stock, ready to ship.

Bondtech DDX Adapter Set

5015 Radial Fan – V3

This version is ONLY compatible with DDX V3.

More Cooling Power

Enhance your part cooling with a stronger fan.
Replace your 4010 or 4020 with a 5015.

Compatible (tested) Fans:

• Sunon MagLev MF50151VX-B00U-A99
• Delta Electronics BFB0524HH
• The 5015 included on the CR-10 v2

Fan not included.

Included:

• 1x 10079-5 DDX v3 Fan Shroud
• 1x M3x10 Button Head Screw
• 1x M3 Square Nut
• 1x M3x20 Screw

SLS printed in PA12 for a lifetime of use.

BL Touch

This BL Touch mount is recommended to install the popular bed levelling sensor on our Bondtech DDX Direct Drive eXtruder for Creality. This PA12 version allows for higher working temperatures than its FDM counterpart.

The Universal version has a slot to enable adjusting the Z off-set to the bed and nozzle tip, thus enabling it to be used with all available hotends compatible with the DDX, DDX V2, and DDX V3.

If you use a Copperhead or a Mosquito hotend, be aware we have available specific versions for those hotends.

STL File Also Available As Free Download

This part has an STL file available to download from our server.

Click here to access the STL downloads list.

The list includes a revised model to use with Ender-6.

Included in this product

1x 10079-66 SLS Universal BL Touch Mount for DDX V3

Micro Swiss All-Metal

This adapter set is necessary to install a Micro Swiss All Metal hot end on a DDX Direct Drive eXtruder for Creality.

Included:

• 10079-53 SLS Micro Swiss Adapter for DDX V2 and V3

SLS printed in PA12 for a lifetime of use.

Creality CR-10 V2 / V3

This adapter kit enables the use of the Bondtech DDX V3 extruder on the following printer models. You can find a link to the DDX V3 extruder below!

• Creality CR-10 v2
• Creality CR-10 v3

Includes:

• 1x 10079-5 5015 Fan Shroud
• 1x 10079-65 DDX mounting plate
• 1x 10079-45 DDX bowden mount
• 1x 10079-80 DDX Z Sensor Plate
• 6x M3 square nuts
• 2x M3x25 bolts
• 1x M3x20 bolt
• 2x M3x8 bolts

Needed, but not included:

• Bed leveling sensor adapter (available separately) – Firmware modification may be required

• BLTouch Universal
• BL Touch for CR-10S Pro + Mosquito
• BL Touch for Copperhead
• 12mm EZABL
• 18mm EZABL

• Upgraded Hot End

• Slice Engineering Copperhead
• Slice Engineering Mosquito
• Slice Engineering Mosquito Magnum
• Micro Swiss All Metal (Requires additional mount)

Not compatible with DDXV1 or DDXV2

SLS printed in PA12 for a lifetime of use.