Flux 2 Smart Indoor Trainer

FLUX 2 Smart
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement.

FEATURES & SPECIFICATIONS

FEATURES
Type of trainer – Interactive Smart direct drive with electric brake
Magnets- 8 Permanent ferrite magnets & 8 electromagnets
Transmission – None
Electrical requirements – 110-240 Volt
Power indicator- None
Connection indicator(ANT/BT) – 2 LEDs
Firmware upgradable – Yes
Suitable cassettes – Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately
Suitable axles – Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.
Suitable bikes – Race, Tri & MTB
Supplied with – Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software

SPECIFICATIONS
Max. power (40 km/h) – 2000 Watt
Max. incline – 16%
Simulation of descent – No
Max. torque – 41 Nm
Max. brake force – 120 N
Flywheel – Actual of 7.6 kg
Mass inertia – 31.2kg
Calibration – Spin down
Footprint(lxw) – 670 x 642 mm (26.4 x 25.3 in)
Height – 460 mm (18.1 in)
Dimensions when folded – Not foldable
Weight – 23.6kg (52lbs)
Article number – T2980

DATA OUTPUT AND CONTROL
Wireless communication – ANT+ FE-C, Bluetooth Smart open
Control by – Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna
Output – Speed, Cadence, Power
Read out on – Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna
Accuracy – <2.5%