JRL FreshFade 2020C Gold Professional Cordless Clipper

JRL FreshFade 2020C Gold Professional Cordless Hair Clipper

The JRL FreshFade 2020C Gold professional cordless hair clipper features a quiet rotary motor (under 60db) and a microchip with intelligent technology. The clipper can be set to 2 cutting speeds: 6000rpm or 7200rpm, depending on the hair type or length. It is equipped with a speed lock button, which will maintain a fixed motor rotation even during intensive use and will not allow the speed to decrease. The JRL FreshFade clipper blade is made from a revolutionary material that operates at a low temperature. The adjustable cutting length between zero-gap, 0.5 and 3.5mm and the cutting width of 40mm allow for any type of haircut. The clipper is equipped with a 3.6V 3000mAh Lithium-Ion battery, providing a run time of 240 minutes (4 hours) and a charging time of just 180 minutes (3 hours). It is very lightweight, weighing only 340g, which allows for an easy and very relaxing haircut. The clipper is equipped with a hanging hook for convenient storage. Voltage 100-240V 50/60Hz suitable for European salons. The LED color display indicates the remaining run time, oil level, and charge level.

The box contains:

European Charger Screwdriver Lubricating and maintenance oil Cleaning brush Blade protection Zero-gap adjustment tool Charging cable 10 attachment combs (#, #1, #1-1/2, #2, #3, #4, #5, #6, #7, #8)

Premature wear of clipper blades:

In general, physical wear can occur for several reasons. Most often, it happens due to incorrect use or non-compliance with essential maintenance steps. Among the most common, we can mention:

-lack of lubricant film on the blade surface

-rapid overheating during operation due to lack of proper maintenance

-wear of the plastic guide

-presence of residues (fur/hair, metals, dust, and other foreign materials) between the lower and upper blades

We recommend using cooling and lubricating spray between haircuts for proper maintenance.

Proper maintenance of clipper blades:

Clipper blades must be oiled with a special oil before, during, and after use. If the clipper blades leave a streak or seem to slow down the clipper, they need screw adjustment, tension spring or plastic guide check, and oiling with a film of oil. The procedure involves applying a few drops of oil to the front of the blades and to the moving parts. Excess oil should be wiped off immediately with a dry, clean cloth. When not in use, clipper blades should be stored in a special dry box or in the packaging in which they were purchased.