Jumbo Push Button Switch Chip [Discontinued]

A jumbo-sized momentary pushbutton designed to work in a building brick or conductive sewing based environment. Press the button to add power to a circuit, release it to cut off power.

Like all of ourBrown Dog Crazy Circuits components, this pushbutton is soldered to a small circuit board with large building brick-sized holes in it. The overall PCB size is the same as a 2×4 building brick component. The part is designed to connect to other components in a brick-based environment using conductive tape.

This partcan also be used with Conductive Thread for use in Soft Circuits. Just sew through the large copper plated holes to make your circuit. For quick testingyou can also use alligator clips to connect this to other components.

View other ‘Chips’ in the range or check out our wearables section for more wearable/cosplay items!