Kenton Pro Solo mk3

The latest in Kenton\’s popularPro Sololine of converters, the Pro Solo mk3 features a number of improvements over its predecessor; including 3 continuously variable auxiliary outputs, a built-in ADSR envelope generator, the ability to smooth out steppy MIDI CCs and more. The Pro Solo mk3 is highly configurable and is the ideal converter for anyone looking to incorporate an analogue synthesizer, vintage or otherwise, into their MIDI setup. The CV output can operate at 1V/Oct, Hz/Volt or 1.2V/Oct. The scaling and tuning are adjustable, to accommodate any unruly synths. The Gate output can work at several different voltage levels, and can also be set to work a S-trig instead. The three continuously variable auxiliary outputs are presented on 3.5mm jack sockets; and can be configured to respond to MIDI CCs, velocity, aftertouch, clock and more. In addition to this, the MIDI OUT port can be switched to output Sync24, so your vintage Roland equipment can join in as well. All leads are sold separatelyas we do not know what you want to connect to. Designed to control all types of mono-synth Super-fast response time Famous Kenton build quality Rugged brushed aluminium case CV output uses high specification 16 bit D/A converter for rock-steady pitches Runs from standard 9 volt power supply, 2.1mm centre positive CV/Gate/Aux outputs on 3.5mm jack sockets (3.5mm to 1/4 cables are available in our cables section) MIDI IN socket MIDI THRU socket can be switched to become Sync 24 Any MIDI channel can be selected Switchable for V/oct & Hz/V & 1.2V/oct scaling systems Fine tune & scale are controllable using the edit buttons & settings can be stored Transpose (coarse tune) up & down 12 semitones Adjustable pitchbend range Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up) Multiple and single trigger modes Note priority selection newest / lowest / highest Old notes are remembered to facilitate trill effects and increase playability Portamento fixed rate or fixed time modes Auto Portamento mode selectable (where legato playing turns on Portamento) Portamento Controller is selectable Three programmable Aux variable analogue outputs, controllable by any MIDI controller Programmable LFO 9 wave shapes inc. random LFO can modulate pitch &/or Aux 1 output Separate Controllers for LFO to CV and LFO to Aux 1 LFO can be synchronised to MIDI clock LFO sync point can be selected Key-on can reset LFO Aux outputs can output clock, with two individual dividers to choose from All parameters are controllable in real-time by SysEx 32 setups can be stored in non-volatile memory for easy recall MIDI Analyser mode for easy MIDI troubleshooting Power supply included UK / EU / USA / Australian types available Whats new or different about the Mk3? Aux 2 & Aux 3 are now continuously variable analogue outputs and are presented on 3.5mm jack sockets Expanded selection of Controllers available for the Aux outputs The Aux outputs now have adjustable slew rate (rise/fall time) to enable you to smooth out any controller jumps Built-in ADSR envelope generator (the controls for which can be assigned to MIDI CCs) Drum Trigger mode Aux outputs can be set to produce a velocity-variable trigger pulse for drum synths, each with its own dedicated trigger note Dual clock dividers, which can be used simultaneously on different outputs, including the DIN socket when not used as MIDI out Variable gate-off time for re-trigger (multiple trigger) 32 program memories which can store and recall setups MIDI Program Changes can be used to recall setups Pre-loaded setups for many of the most popular synths Pitchbend range increased to 48 notes up & down Flash upgradable using SysEx when updates become available 32 bit ARM processor Brushed aluminium case with black text