KY-009 SMD RGB Module

The KY-009 RGB Full Color LED module emits a range of colors by mixing red, green, and blue light. Each color is adjusted by using PWM.

Compatible with popular electronics platforms like Arduino, Raspberry Pi and ESP32.

This module consists of a 5050 SMD LED and 4 male header pins. Use with limiting resistors to prevent LED burnout.

CONNECTION DIAGRAM

Connect the red pin (R) to Pin 9, the green pin (G) to pin 10, the blue pin (B) to pin 11 and finally the ground pin (-) to GND.

You must use resistors between the board and the Arduino to prevent LED burnout.