Lambda Bikini Pod No 1 – White

TPU pod designed to fit all Lambda frames. The design is available on thingiverse if you wish to print yourself.

The No1 pod works with 25mm standoffs at the rear andNOTthe rear A standoff which is 30mm.

The VTX antennamoiunts with SMA or RPSMA connector to a Unify or similar. Stubby antenna is recommended, particularly the axii.

If the preferred pod colour is out of stock, feel free to order as we print regularly, your order will be delayed by an extra couple of days…..

We recommend you use large washers for the front TPU feet. You will need screws and nuts to mount the front feet.

Contains one (1)pod. Ships with no hardware, 25mm standoffs or CF plate (as per the picture).