Redundancy Fiber Optic Cable | 1756-RMC1

Allen-Bradley 1756-RMC1 Redundancy Fiber Optic Cable (1 Meter)

Key Features

1-meter (3.28 ft) LC-to-LC duplex fiber cable

1300nm wavelength for industrial networks

Supports <1000MB/s data transmission

Compatible with 1756-RM2/RM2K/RM2XT modules

Bend-resistant design for tight installations

Technical Specifications

Length: 1 meter (3.28 feet)

Connector: LC duplex (male both ends)

Temp Range: 0C to 60C (32F to 140F)

Max Bend Radius: 30mm (1.2in)

Fiber Type: 50/125m multimode OM2

Compatible Systems

Modules: 1756-RM2 (Standard) | 1756-RM2K (Enhanced) | 1756-RM2XT (Extreme Temp)

Chassis: All ControlLogix 1756 series

Network: ControlLogix Redundancy System

Installation Guide

1. Always remove protective caps before connection

2. Connect to bottom port in downward orientation

3. Use LC couplers to prevent sharp bends

4. Route away from high-traffic areas

5. Verify link status LEDs after installation

Safety Notes

Do not exceed 30mm bend radius

Avoid crushing or abrasion during installation

Inspect connectors for dust/debris before use

Replace if jacket shows signs of damage

Typical Applications

Short-distance chassis-to-chassis links

Cabinet-to-backpanel connections

High-vibration environments

Electrically noisy areas

Hazardous location installations

Package Contents

1756-RMC1 fiber cable (1 unit)

Protective end caps (2 pairs)

Installation leaflet

Ordering Options

Alternative Lengths: 1756-RMC3 (3m) | 1756-RMC10 (10m)

Shipping: FedEx/UPS/DHL (2-day available)

Support: 24/7 redundancy system specialists