Simpson 2-2×4 Post Cap w/Double-Shear Nailing, G90 Galvanized BCS2-2/4

The Strong-Tie BC series offers dual purpose post cap/base for light cap or base connections. The BCS2-2/4 post cap is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BCS2-2/4 post base features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

• Model No.BCS2-2/4
• Nominal Post SizeDouble 2x beam, 4x post
• Ga.18
• W1 (in.)3 1/8
• W2 (in.)3 9/16
• L1 (in.)2 7/8
• L2 (in.)2 7/8
• H1 (in.)2 15/16
• H2 (in.)2 15/16
• Coating/MaterialZinc Galvanized, G90
• Product Guide & SPECS:View Spec Sheet
• Manufacturer Name: Simpson Strong-Tie
• Fasteners Required: Beam Flange – (8) 0.162 x 3-1/2″ Nails Post Flange – (6) 0.162 x 3-1/2″ Nails

Installation:

• Use all specified fasteners.
• Do not install bolts into pilot holes
• BC: install with 16d commons or 16dx2 1/2″ joist hanger nails.
• Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
• To tie multiple 2x members together, the Designer must determine the fasteners required to join members to act as one unit without splitting the wood.

Note: Product dimensions and/or Nail or Screw holes may differ from picture. Please see item description for specifications.