Simpson 6×6 Column Cap T Configuration, Quick-Install CCTQ666SDS

The CCTQ is designed to provide strong column-to-beam connections when there are two beams in a “T” formation on top of a column. When properly installed, this column cap helps to distribute the load from bisecting beams and provides support for the connection.

The CCTQ uses Strong-Drive SDS Heavy-Duty Connector screws to provide faster installation and a lower profile than standard through bolts and is special-ordered per specific details from the designer to accommodate the many combinations of beam and post sizes.

• Model No. CCTQ666SDS
• Beam (in.) 6X
• Post (in.) 6X
• Material. 7 Gauge
• Finish. Simpson Strong-Tie gray paint.
• Strong-Drive SDS Heavy-Duty Connector screws included
• Contact us for Configurable Options and Special orders

Key Features

• Screws are configured to provide high uplift design values
• Certified welds for confidence in strength and loading
• Diamond holes to provide temporary fastening
• See Load Tables / SPECS : Specifications

Installation

• Install 1/4″ x 2 1/2″ Strong-Drive SDS Heavy-Duty Connector screws, which are provided, in all round holes. (Lag screws will not achieve the same load.)
• No additional welding is allowed.

Options

• Available in widths up to 8″ wide.
• Straps may be rotated where W1 ? W2.
• Many combinations of beam and post sizes can be manufactured Contact us for Configurable Options and Special orders .
• Column caps may be ordered without the column straps for field welding to a steel column, full loads apply for the beam and the post cap. Specify “No Straps” when ordering. Weld by designer. These models have no coating.

This is a Special Order product, non-refundable. Please verify that all configurations / specifications are correct before checking out.

Note: Product dimensions may differ from picture. Please see above item description for specifications.