Simpson MTS30C-REV 30″ Medium Twist Strap – Reverse Bend

• Model No. MTS30C-REV (Reverse Bend)
• Thickness (mil) 54
• Gauge. 16
• Length (in.) 30
• Coating/Material. Zinc Galvanized, G90

The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.
Key Features

• Available with the bend reversed
• Straps do not need to be wrapped over the truss to achieve the allowable load
• Versatile with many lengths offered to fit the specific application

Installation

• Install with 10d common nails, 10d x 1-1/2 in. nails or #9 x 1-1/2 in. Strong-Drive SD screws
• Available with the bend reversed. Specify “-REV” after the model number, such as MTSXX-REV.

This is a Special Order item, or Made to Order by Simpson Strong-Tie, it is non-refundable. Please verify that all configurations / specifications are correct before checking out.

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.