Simpson NCA2X8-16 Nailless Compression Bridging 2×8, 2×14

• Model No. NCA2X8-16
• Gauge. 20
• Length (in.) 15 1/4
• Joist Size. 2×8, 2×14
• Coating/Material. Zinc Galvanized, G90

The NCA provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this nailless compression bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The NCA features precision-formed v-shaped prongs, in place of nails, to provide a secure grip before the drive-home blow for deeper prong penetration.
Key Features

• Galvanized for corrosion resistance
• Keeps floor system continuity and prevents joist rotation
• Installs with built-in prongs that eliminate nail squeaks

Installation

• Support floor joists with a depth-to-thickness ratio of six or more with bridging at intervals not exceeding 8′. If span is greater than 8′, install on 2×8 or larger joists. If span is greater than 16′, use more than one pair.
• Tension bridging works only in tension, so must be used in cross pairs.
  Install bridging tightly; loose installation may allow floor movement.
• May be installed before or after sheathing, from the top or bottom. Simply locate the bend line approximately 1″ from the joist edge.
• Has nail holes in one end for use if a prong is bent during installation. Fully seat nails (0.131″ x 1 1/2″) if they are used; otherwise, they may lead to squeaks.

Note: Product dimensions may differ from picture. Please see item description for specifications.