Triumph Lucid H7 Flight Controller-NDAA

Triumph Lucid H7 Flight Controller NDAA

Triumph Lucid H7 Flight Controller 480MHz MCU, Dual Gyro, Betaflight & ArduPilot

Unleash Precision & Performance with the Triumph Lucid H7 Flight Controller!

The TriumphLucid H7 Flight Controller is engineered for elite FPV pilots, offering exceptional processing power, versatility, and seamless compatibility with Betaflight, ArduPilot, and INAV. Whether youre freestyling, racing, or optimizing for long-range missions, the 480MHz STM32H743 processor ensures ultra-fast response times and reliable flight control.

Equipped with dual ICM42688 gyros, 7 UARTs, a dedicated Blackbox MicroSD slot, and dual-camera input support, the TriumphLucid H7 stands out as a feature-packed, high-performance flight controller for any advanced build. Its DJI FPV OSD compatibility and power-efficient design make it a go-to choice for professional pilots and hobbyists alike.

Key Features:

High-Performance 480MHz Processor

STM32H743VIH6 MCU with 1MB RAM & 2MB Flash for extreme processing power

Supports Betaflight, ArduPilot, and INAV

Advanced Sensor Suite & OSD Integration

Dual ICM42688 gyros for ultra-precise flight stabilization

AT7456E SPI OSD chip for clean, integrated flight data overlay

Infineon DPS310 barometer for altitude hold & advanced telemetry

Expanded Connectivity & Smart Features

13 PWM outputs, including a dedicated LED pad

7 UARTs, fully signal-inversion ready

Dual camera input, switchable for FPV flexibility

CAN Bus support for extended hardware compatibility

3x LED indicators for status & power monitoring

Efficient Power Management

Wide input voltage support (6V-36V, 2-8S LiPo)

5V 2A & 9V 2A BECs for powering peripherals

Low power consumption (200mA @ 5V with Betaflight, 150mA @ 5V with ArduPilot)

Filtered 5V/Vbat output switch for clean power delivery

Plug & Play Convenience

USB Type-C interface for fast, easy configuration

Pre-wired FC-to-ESC and DJI O3 cables for seamless installation

Shock-absorbing M3 rubber dampers included for reduced vibration

Specifications:

Processor & Sensors:

MCU: STM32H743VIH6, 480MHz

Gyro: Dual ICM42688

OSD Chip: AT7456E (SPI2)

Barometer: Infineon DPS310

Connectivity:

PWM Outputs: 13 channels

Blackbox: MicroSD slot (SDIO) for data logging

UARTs: 7 total (1, 2, 3, 4, 6, 7, 8), inversion-ready

I2C Buses: 2 available

CAN Bus: 1 available

ADC Inputs: 6 channels (VBAT, Current, RSSI, AirSpeed, etc.)

USB Interface: Type-C (USB 2.0)

JST Connectors:

1x JST-SH1.0 8-pin (Vbat/G/Curr/Rx8/S1-S4)

1x JST-GH1.25 4-pin (5V/CAN-H/CAN-L/Ground)

Video & FPV Integration:

Dual camera inputs, switchable

DJI FPV OSD support via any spare UART port

Power Management:

Input Voltage: 6 – 36V (2-8S LiPo)

BECs:

5V 2A continuous (3A max)

9V 2A continuous (3A max)

LDO 3.3V: Supports up to 200mA

Voltage Support: ADC Vbat2 pad supports up to 36V

Power Consumption:

200mA @ 5V (Betaflight)

150mA @ 5V (ArduPilot)

Firmware Targets:

ArduPilot: TBS_LUCID_H7

• v4.6.1If you purchased this unit before August 25, 2025, and have experienced any boot-up issues, please update to this firmware version or the next available stable release to resolve the problem.

Betaflight: TBS_LUCID_H7

INAV: TBS_LUCID_H7

Whats Included?

1x Triumph Lucid H7 Flight Controller

1x FC-to-ESC Cable (Plug & Play)

1x DJI O3 Cable (Plug & Play)

4x M3 Rubber Dampers

4x M3x8 Screws

Downloads & Resources:

Gorilla Mounting Pattern

Frame Developer Pack for Gorilla Mounting Pattern

AM32 Online Configurator & Firmware

TBS Lucid Manual

Why Choose the Triumph Lucid H7 Flight Controller?

Powerful 480MHz MCU for extreme performance

Dual gyros & multiple sensor integration for precise control

Versatile firmware support: Betaflight, ArduPilot, INAV

Built-in Blackbox logging for advanced tuning

Plug & Play support for DJI FPV OSD & dual-camera input