Name: Waveshare 2.13inch Touch E-Paper Display for RPi Zero Series 250x122
SKU: US31210895
Availability: InStock

Description
Reviews (0)

2.13 inch touch e-Paper with case

2.13inch Touch E-Paper Display for Raspberry Pi Zero Series

A 250 122 black-and-white touch e-paper display designed for Raspberry Pi Zero series boards, featuring a 5-point capacitive touch panel, ABS protection case, SPI display interface, and ultra-low power paper-like display.

Key Features

2.13 inch e-paper display with 250 122 resolution.
Specialized for Raspberry Pi Zero series boards.
ABS dull-polish protection case with precise cut-outs.
5-point capacitive touch with toughened glass touch panel.
Supports wake-up by user-defined gesture.
Standard Raspberry Pi 40PIN GPIO header.
SPI display interface with partial refresh support.
No backlight required; content remains visible after power is removed.

Specifications

Operating voltage	3.3V
Display color	Black / White
Display interface	3-wire SPI / 4-wire SPI
Touch type	Capacitive touch
Touch interface	I2C
Touch points	5 max.
Grey scale	2
Resolution	250 122 pixels
Display size	48.55 23.70mm
Outline dimensions	69.15 38.90mm
Full refresh time	2s
Partial refresh time	0.3s
Refresh power	26.4mW typ.
Dot pitch	0.194 0.194mm
Standby current	<0.01uA

Why E-Paper

E-paper reflects ambient light like printed paper, stays readable under lamplight or natural light, and keeps the last displayed content after power is removed.

Case Design

The ABS protection case uses precise cut-outs, rounded corners, and slanted sides for easier standing. Rear heat dissipation holes work with thermal tape for better cooling.

Raspberry Pi Zero Series Support

The standard 40PIN GPIO header is designed for Raspberry Pi Zero series boards. Raspberry Pi shown in reference images is not included.

Pinout and Control Interface

The display is controlled over SPI. The touch panel uses I2C signals through the onboard interface.

VCC	3.3V
GND	Ground
DIN / CLK	SPI MOSI / SPI SCK
CS / DC	SPI chip select / data-command selection
RST / BUSY	Display reset / busy status output
INT	Touch controller interrupt signal
SCL / SDA	Touch controller I2C clock / data

Demonstration

Suitable for Raspberry Pi Zero dashboards, low-power status panels, compact control interfaces, shelf labels, asset tags, and interactive e-paper projects.